CYLINDRICAL BEACONS H75
H75 BEACONS ACCESSORIES
Señal Confor supplies its beacons with anchors expressly designed by our technical department. In this family there are various anchors of pure expansion, expansion plus chemical adhesion and pure chemical fixation.
Each substrate or situation has an optimal anchoring shape and Señal Confor supplies and advises the most appropriate for each case.
The different beacons are supplied as standard with a standard anchor valid for most of the cases but if you encounter a special situation (slabs, bridge boards, heating signatures, interior pavements, etc.), ask us about your case and we will try help you with the best solution.
| Ref | Item description | Units pack | Colour | Technical sheet |
|---|---|---|---|---|
EXPB181520
|
Standard expansion anchor for fixing H75 Standard Beacons. Ø18mm x 150m long expansion block and M12x150mm screws. View technical sheetIt is installed with 18 mm Ø drill bit and a clean 16 cm deep hole. |
15 | ||
EXPB222120
|
Extra strong expansion anchor for fixing H75 Beacons resistant to car impacts. Ø22mm x 200mm long expansion block and M12x200mm screws. View technical sheetIt is installed with Ø 22mm drill bit and 22cm deep clean hole. Optional adhesive SP101 Henkel or equivalent not included in the price. |
15 | ||
META1416ZN
|
Metallic chemical anchors for H75 beacons. 18mm diameter x 180mm long. With M12 short screw. Galvanized zinc steel In option with depth limited to 8cm. View technical sheetIt is installed with a 16-18mm diameter drill and an 18 cm deep Metallic chemical anchors for H75 beacons. 18mm diameter x 180mm long. With M12 short screw. Galvanized zinc steel In option with depth limited to 8cm. It is installed with a 16-18mm diameter drill and an 18 cm deep hole. You need adhesive type SP101 Henkel or equivalent not included in the price. |
15 | ||
EXPB181620
|
Standard expansion anchor for fixing type BBAS2 H75 beacons. Ø18mm x 150mm long expansion block and M12x150mm screws, and red conical washer. View technical sheetIt is installed with Ø 18mm drill bit and a 16cm deep hole. No adhesive needed. |
15 | ||
EXPB181411
|
Standard expansion anchor for fixing type BBAS3 H75 beacons. Ø 14mm x 160mm long expansion block and M12x150mm screws, and red conical washer. It is installed with Ø 14mm drill bit and a 17cm deep hole. No adhesive needed. |
15 | Not available | |
EXPB141011
|
Standard expansion anchor for fixing removable H75 beacons models. With M10x100mm screws. Gray. It is installed with Ø 14mm drill in a 12cm deep clean hole, with M10x100mm screws. 3 pieces are needed per H75. |
45 | Gray | Not available |
GUIA1040ZN
|
Eyebolt for H75 beacons. Mixed. It is fixed in the upper hole of H75 beacons of any type already installed in toll roads and impassable alignments. View technical sheet |
15 | ||
TAPAL325520
|
Ø 55mm plug for top sealing of H75 beacons. Black color. Used for H75 beacons BADES, BARET, BBAS2 & BBAS3 types |
15 | Black | Not available |
| TAPAL324520
|
Ø 45mm plug for top sealing of H75 beacons. Black color. Used for H75 beacons BAFC, BAIC types |
15 | Black | Not available |
SOPPILOCAN
|
Built-in metal support for removable fixing of PILOCAU100 beacon. It works with a universal key (included). It has a cover to cover the hole when the bollard is not in place. Prevents the entry of dirt and it prevents accidents. |
Not available | ||
LEXE190013
|
Blue Magnetic long key.19mm hexagon. Serves to install H75 beacon anchor with M12 screws. It serves for anchors ref. EXPB181520, EXPB222120 and META1416ZN, with Metric screw 12 or M12 screw. |
1 | Blue | Not available |
CARSP10111
|
HENKEL SP101 single component adhesive for anchor fixing. 330 gram cartridge. Suitable for over-fixing expansion anchors in asphalt and even wet concrete substrates. One cartridge reaches for 15-20 fixings. Operating temperature + 40ºC + 10ºC. |
15 | Grey | Not available |
| Ref | View technical sheet | Download PDF |
|---|
| Ref | Item description | Quantity | Delete | |
|---|---|---|---|---|
